BE
Automatic tape/chain cutter (AT)
Presser foot lift device (PL)
3-point material sensor
Safety sensor (presser foot lifter)
Touch panel operation
Voice guidance
Universal serial bus port (USB)
LED light
Handle
AE
Presser foot lift device (PL)
Universal serial bus port (USB)
LED light
Handle
S
Universal serial bus port (USB)
LED light
Handle
Universal serial bus port
Light Emitting Diode light
Voice guidance
* BE only
Touch panel
* BE only
*BE only
3sensors for detecting fabric
also cutting tape/chain at the start and end of sewing.
* BE, AE only
Model | No. of needles | No. of threads |
Needle space (mm) |
Overedge width (mm) |
Max.stitch length (mm) |
Diff.feed ratio |
Presser foot lift (mm) |
Needles |
Max speed (sti/min) |
Fabric weight |
M32-5/333 | 2 | 5 | 3 | 4 | 0.6~3.8 | 1:0.7~2 | 5.5 |
DCx27 #14 |
7000 | Medium-Heavy |
5 | 5 | |||||||||
M32-5/435 | 2 | 5 | 5 | 6 | 0.8~5.0 | 1:0.8~1.5 | 7.0 |
DCx27 #20 |
6500 | Heavy-Extra heavy(denim) |
M52-4/333 | 2 | 4 | 2 | 4 | 0.6~3.8 | 1:0.7~2 | 5.5 |
DCx27
#11 |
7000 | Medium-Heavy |
BE-type display
❶ | Key unlock key / Parameters key |
❷ |
Save key |
❸ |
Light Emitting Diode key (LED) / Cursor move left key |
❹ |
Light Emitting Diode key (LED) / Cursor move right key |
❺ |
Increase key |
❻ |
Decrease key |
❼ |
Sewing mode key |
❽ |
Pressor foot mode key |
❾ |
Cutter mode key |
❿ | Suction mode key |
⓫ |
Sensor key |
⓬ |
Cloth identification key |
A |
Display |
B |
Front sensor detects the fabric |
C |
Middle sensor detects the fabric |
D |
Back sensor detects the fabric |
E |
Red : failure, Green : normal |
Un-lock [P]
LED adjust
State
Sensor
S-type display
❶ | Parameters key |
❷ |
Save key |
❸ |
Increase key |
❹ |
Decrease key |
❺ |
Light Emitting Diode (LED) increase / Decrease key |
❻ |
Needle position up / down key |
❸+❹ |
Reset (factory setting) key |
A |
Display |
LED adjust
Change needle position
China